llaza WINBOX-350, Technical Manual

Page: 7 / 20

Page 7 - Copyright Llaza, S.A. - May 2012
WINBOX-350
Descriptive specifications
6. COMPONENT SPECIFICATIONS
GEOMETRIC PROPERTIES
Geometry Section (mm2) Mt (cm4)
Structure
Wall support (1000 mm)
-
1804,281 Ixx = 484.085 Iyy = 7.201
Cassette profile
-
1262,306 Ixx = 175.07 Iyy = 314.291
Weather cover profile
-
808,567 Ixx = 21.34 Iyy = 191.78
Front drop bar profile
-
1029,784 Ixx = 260.635 Iyy = 82.62
WIN-350 model arms
Structural components
- -
Front aluminium profile
-
335 Ixx= 4.24 Iyy = 16.21
Rear aluminium profile
-
514 Ixx = 9.86 Iyy = 27.04
TECHNICAL CHARACTERISTICS
Structure
Process Desig. Material A* B* C* D*
Components
Gravity moulding Aluminium 170 80 5 55
Wall support
Extrusion Aluminium 270 225 6
-
Ceiling bracket Sand moulding Aluminium 80 140 2 55
Cassette profile
Extrusion Aluminium 175 130 6
-
Weather cover profile Extrusion Aluminium 175 130 6
-
Front drop bar profile Extrusion Aluminium 175 130 6
-
Extrusion comp. Extrusion Aluminium
WIN-350 model arms
Components
Pressure moulding Aluminium 180 90 2,5 55
Front alum. Aluminium Extrusion Aluminium 175 130 6
-
Rear alum. Aluminium Extrusion Aluminium 270 225 6
-
DESCRIPTION
A*
Resistance to traction Rm (Mpa)
B*
Elastic limit Rp 0,2 (Mpa)
C*
Elongation A50 mm (%)
D*
Brinell Hardness HBS
MAXIMUM DIMENSIONS MAXIMUM WIDTH MAXIMUM PROJECTION
600 350
ANGLE OF INCLINATION WALL CEILING
6° to 60° 6° to 60°