llaza WINBOX-350, Technical Manual

Page: 15 / 20

Page 15 - Copyright Llaza, S.A. - May 2012
WINBOX-350
Assembly instructions
5. INSTALLING THE FRONT PROFILE
Slide the front drop bar profile
onto the fabric, by inserting the
hem rod into the slot in the pro-
file.
Secure the fabric into the profile
using the spreader and screw
on each end.
From the side, slide the plates
(O) attached to the arm end
pieces into the drop bar profile.
O
P
After inserting the Mikalor thread-
ed plates
(P) into their slots, at-
tach the aluminium side caps to
the front drop bar profile.
Before doing this, remember to
insert the polyamide strips
(Q)
into the profile interior.
There are two of these strips for
each side, so that one will match
up with each of the arm forks and
arm joints.
Q