llaza WINBOX-350, Technical Manual

Page: 12 / 20

Page 12 - Copyright Llaza, S.A. - May 2012
WINBOX-350
Assembly instructions
Now install the front fabric profile,
fitting it onto the cassette profile
and attaching it to the sides using
the DIN 7982, 4.2x45 screws
(E) .
Pieces of adhesive draft excluder
strip can be attached to the front
interior of this profile to prevent
noise when the cassette closes.
E
F
IMPORTANT
Prior to re-joining the two elements of the bracket, insert the DIN 933, M6x35 bolts (F) with the
heads on the inside, and use the plastic washers to hold them in position while the two components
are assembled.
Now re-attach the outside of the
side bracket, using the bolts that
were previously removed.
To couple these two components
properly, the teeth of the racks on
both sides must be at the same lev-
el, according to the inclination of the
awning, which can later be adjusted
after final installation.