llaza WINBOX-350, Technical Manual

Page: 13 / 20

Page 13 - Copyright Llaza, S.A. - May 2012
WINBOX-350
Assembly instructions
2. INSTALLING THE END BRACKET AND MOTOR BRACKET
Once the bearing end of the rolling tube is inserted, position the bracket plate along with the bear-
ing (G) , and attach it using the bolts previously inserted and the self-locking M6 nuts (H) .
G
J
K
H
Attach the HiPro bracket (I) to
the bracket plate using the DIN
7991, M6x12 bolts
(J) (kit refer-
ence 11002035050).
Remember to attach the motor
to the bracket using the clip
(K) .
Next, insert the motor assembly
with the drive wheel and the
adaptor crown into the inside of
the rolling tube, then attach the
bracket plate using the bolts
previously inserted and the oth-
er three self-locking nuts
(H) .
IMPORTANT
In order to ensure perfect clo-
sure of the WINBOX system,
the motor power selection cal-
culations must be respected.
H
I