LIYU PZR-KV-1 Series High Speed
. LIYU-PZR-KV-1-Series Manual
www.liyu-dms.com
- 54 -
Add ink and fill the print head with ink
Install ink and cleaning fluid
Directly place the cleaning fluid bottle and ink bottle with enough ink in the lower right
box of the machine according to the color order marked on filters (
placement is shown in
the following figure
), and insert the ink tube of corresponding color into the ink bottle.
Note: In the following figure, K, C, M and Y stand for corresonding four colors of ink, and F
is the cleaning agent.
Inject ink into the auxiliary ink tank
Please make sure that there is enough ink in the main ink bottle before injecting ink into the auxiliary
ink tank and the steps are as follows:
Ensure that there is enough ink in the main ink bottle and conduct inspection of the machine
before starting.
Start the inkjet printer. You can either reset the machine or not reset the machine by pressing
motor power button and cutting off motor power line.
After the inkjet printer starts, ink pumps of various colors will set to work and pump ink
from the main ink bottle to the auxiliary ink tank.
When all the ink pumps stop working, it means all the auxiliary ink tanks have been injected
with ink.
The transient buzzer sound during the process may be resulted from rather long ink pump
route and timeout.
