LIYU PZR-KV-1 Series High Speed
LIYU-PZR-KV-1-Series Handbuch
www.liyu-dms.com
- 25 -
The rotation direction marked in Picture 2 is the rotation direction of loosening
the adjustment rod.
The rotation direction marked in Picture 3 is the rotation direction of raising the
print head height.
The rotation direction marked in Picture 4 is the rotation direction of reducing the
print head height.
When you need to adjust the print head height, please follow the steps below:
a.
Rotate the lock screw as per the rotation direction in Picture 2 and loosen the
adjustment rod.
b.
Rotate the adjusting handle as per Picture 3 and Picture 4 (when you raise the print
head height, rotate the handle as per Picture 3. if you reduce the print head height,
rotate the handle as per Picture 4.) and adjust the print head to the proper height.
c.
Fasten the adjustment rod as per the rotation direction in Picture 1 and complete the
adjustment of print head height.
Two-way valve core:
Every two-way valve has two taps and two valve cores and is
connected with the ink nozzle of two different print heads through
ink tube. In the state of pressing ink to the print head, use a flat
head screwdriver. The flat head gap in vertical state
stands for open state, then ink and bubble will flow to the
two-way valve through ink nozzle of the print head and
discharge from the ink outlet beneath. the flat head gap in
horizontal state stands for close state and blocks the ink inlet
of two-way valve.
