LIYU DMS PZR3204-KV-1 Operation Manuals Download

Page: 53 / 65

LIYU PZR-KV-1 Series High Speed

. LIYU-PZR-KV-1-Series Manual

www.liyu-dms.com

- 53 -

Switch of single and double-roller feeding system

Notes: the switch of single and double-roller feeding system is installed in the lower left box of the

machine. only the machine with single and double-roller feeding functions has this button.

1: Infrared Heater

Switch on infra-red tube and temperature controller. The
temperature of factory setting is 50

℃

. Press “

set

” button,

then the number after decimal point glitters, adjust it by
pressing “

∧

”and “

∨

”. press “

set

” button for the second time,

the number right before decimal point glitters, adjust it by
pressing “

∧

”and “

∨

”. press “

set

” button for the third time,

the second number before decimal point
glitters, adjust it by pressing “

∧

”and “

∨

”.customers adjust

the temperature according to actual conditions.

2: Front Media

Heater

Turn on the rocker switch on the right side and adjust the
temperature in the same way as 1, with the temperature of
factory setting at 40

℃

. Customers adjust the temperature

according to actual conditions.

：

Bed Media

Heater

Turn on the rocker switch on the right side and adjust the
temperature in the same way as 1, with the temperature of
factory setting at 40

℃

. Customers adjust the temperature

according to actual conditions.

4: Rear Media

Heater

Turn on the rocker switch on the right side and adjust the
temperature in the same way as 1, with the temperature of
factory setting at 40

℃

. Customers adjust the temperature

according to actual conditions.

The button

controls single

or double

roller

feeding

Summary of Contents for PZR3204-KV-1


































































Search results

Summary of Contents for PZR3204-KV-1

Reviews:

Related manuals for PZR3204-KV-1

Brands by name

Popular brands

LIYU DMS PZR3204-KV-1, Operation Manuals

Search results

Summary of Contents for PZR3204-KV-1

Reviews:

Related manuals for PZR3204-KV-1

Brands by name

Popular brands