LIYU PZR-KV-1 Series High Speed
LIYU-PZR-KV-1-Series Handbuch
www.liyu-dms.com
- 41 -
5.
Install all the print heads onto the bottom plate of printing head according to the above
four steps and tighten all the fastening screw and adjusting screw.
6.
After installing all the print heads as per the above method, you will install the ink path
of the print head. There are two positions on the print head for connecting with ink tube,
namely ink inlet 2 and ink outlet 1, as shown in the following figure:
Before leaving the factory, the machine has been equipped with ink tubes as needed, as shown in the
following figure:
Valve
body
This is the eight
-
print machine. The quantity
ink tubes allocated of for machines of other
models may vary.
