background image

3

Warnings, Cautions and Others

THE FOLLOWING APPLIES ONLY FOR U.S.A.

CAUTION!

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.  However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
   receiver.
• Connect the equipment into an outlet on a circuit different
   from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
   help.

IMPORTANT FOR LASER PRODUCTS

1) CLASS 1 LASER PRODUCT
2)

 DANGER

: Visible and invisible laser radiation when open and

    interlock failed or defeated. Avoid direct exposure to beam.
3)

 CAUTION

: Do not open the top cover. There are no user

    serviceable parts inside the Unit; leave all servicing to
    qualified service personnel.

CAUTION!

THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT
OPEN THE COVER AND DO NOT REPAIR YOURSELF.  REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO
MOISTURE  AND ENSURE THAT OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE PLACED AWAY FROM
THE APPARATUS.

The lighting flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to
humans.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and mainte-
nance (servicing) instructions in the literature
accompanying the appliance.

CAUTION! –– 

POWER

 button

Disconnect the main plug to shut the power off completely. The
POWER

 button in any position does not disconnect the main

line.  Power can be controlled from the remote.

CAUTION!

TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER OF THIS UNIT.
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.

CAUTION!

• CD-R/RW discs recorded using a personal computer or a
CD Recorder may not play if the disc is damaged or dirty, or
if there is dirt or condensation on the player’s lens.
• Unfinalized CD-R/RW discs can be played, but not all time
information (playing time, etc.) will be displayed.
• Check the copyright laws in your country before recording
from DVD VIDEO, SVCD, Video CD, Audio CD, MP3 and
JPEG discs. Recording of copyrighted material may infringe
copyright laws.

Legal Notices Regarding

Macrovision’s Property Rights

“U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,
093; and 6,516,132.”
“ This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual
property rights.  Use of this copyright protection technology
must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise
authorized by Macrovision.  Reverse engineering or disas-
sembly is prohibited. “

PRODUCTS WITH 525P PROGRESSIVE SCAN OUTPUTS
                             NOTICE REQUIREMENTS

“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINI-
TION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN
THE PICTURE.  IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE “STANDARD DEFINITION”
OUTPUT.  IF THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 525P DVD PLAYER,
PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.”

VCR Plus+ and PlusCode are registered
trademarks of Gemstar Development
Corporation. The VCR Plus+ system is
manufactured under license from Gemstar
Development Corporation.

VCR Plus+ system is protected by one or more issued United
States patents such as Pats. 5,307,173; 5,335,079; 4,908,713; 4,
751,578; and 4,706,121

FCC Declaration of Conformity

Model: LVC-9016G/LVC-9017GDL

Trade Name: LITEON

Responsible party:
LITE-ON (USA) International Inc. 42000 Christy Street, Fremont,
CA 94538

Summary of Contents for 9017GDL









































Reviews: