23
Timer Recording
8. Press [
] [
] to select “Date” and press [ENTER] .
Press [
] [
] [
] [
] to make your selection and [ENTER] for
confirmation. To enter the number, use the number buttons (0~9).
Once
DATE: MM/DD
Weekly
DATE: SUN/MON/TUE/WED/THU/FRI/SAT
Daily
DATE:- - - - -
If you make a mistake, press
[
]
to re-enter the
correct number.
ote:
When scheduling timer recording on a disc, the unit automatically
sets the recording quality depending on the length of the recorded
item. If you wish to set other modes of recording quality, proceed
with step 9.
9. Press [
] [
] to select “Quality” and then press
[ENTER] to set the mode of recording quality.
DVD disc recording mode:
HQ <-> SP <-> LP <-> EP <-> SLP
Tape recording mode:
SP <-> EP
10 .When finished, press [
][
] to select the
icon and then press [ENTER] to exit the “Timer-
Record” menu.
If you wish to delete a timer program on the list, press [
] [
] [
]
[
] to move to the “ ” icon and press [ENTER]. The item is
deleted.
11. Press [POWER] to turn off the unit and activate the
timer record function.
Note:
1. When the timer record function is activated, the “Timer” LED on
the display window will light up.
2. Press [
STOP ] and the recording will be stopped. However,
it may take a few seconds for the system to completely stop
the recording.
3. Press [DISPLAY] and the timer record information is displayed.
4. Check the “Status” column to see the recording failure analysis:
OK
The timer program is set and ready to be recorded.
Error
There is a problem with the timer program settings.
Change the settings until the status is “OK.”
Done
The timer program is recorded successfully.
Fail
The unit is unable to record the preset timer program.
Move the cursor to the “Status” column to view the cause
of error (“No Disc,” “Media Defect,” “Disc Full,” and etc.).
