Preparation for use
24
Steel Brush Machine SBM-M 1000/1500 B2
4 Preparation for use
4.1
Transporting the machine
For transport of the machine by crane, there are two steel carriers fastened
to the top of the machine with attachment points. To do this, it is necessary
to unscrew the top cover (pos. 1), to screw in the two steel carriers (pos. 2)
and to reattach the top cover (pos. 1). Both braces (pos. 3) are mounted
between the steel carriers (pos. 2). For transport by forklift, there are
appropriate supports (pos. 4) built in under the brush machine (for tightening
torques, see 8.3).
WARNING
Heavy loads
Injury from falling parts
Do not stop under the lifted machine.
Only use lifting gear and loading equipment with sufficient lifting capacity
and length.
To lift the machine, secure the lifting gear on the four attachment points
(see pos. 2).
Secure the machine by the four attachment points when transporting on a
vehicle (see pos. 2).
Insert the forks into the beams provided (pos. 4) when transporting using
a forklift (maximum transport height 25 cm).
Abb. 10:
Transport supports
1 Top
cover
2 Steel
carriers
3 Braces
4 Beams for forklift
1
2
3
4
Summary of Contents for SBM-M 1000 B2
Page 2: ...About this manual 2 Steel Brush Machine SBM M 1000 1500 B2...
Page 54: ......
