Lissmac SBM-M 1000 B2, Operating Manual

Page: 39 / 54

Service/Repair
Steel Brush Machine SBM-M 1000/1500 B2 39
7.1.3 Removing the V-belts
Abb. 25: Removing the V-belts
1 Drive motor fastening nuts
2 Counter
nut
3 Counter nut
4 Drive motor V-belt pulley

Loosen fastening nuts (1), but do not remove.
 Loosen counter nut (2) and move back a good distance.

Use counter nut (3) to push the belt pulleys (4) and drive motor back.
 Remove the V-belt.
7.1.4 Installing the V-belt
NOTE
Always replace the V-belts in pairs.
If V-belts are replaced individually, secure drive is no longer possible.
Abb. 26: Installing the V-belt
1 Inner V-belt
2 Outer V-belt
 Place both V-belts (1) and (2) onto the pulley.