Operation
28
Steel Brush Machine SBM-M 1000/1500 B2
5.2.3
B-unit gear selection lever
When selecting the individual levels, the indicator lights on the brush units
(on the operating part) switch to the function belonging to that gear.
Abb. 14:
Gear selector lever
1 B-unit top and bottom selected
2 Operational position / sheet thickness
In gear selection lever position (1), the brush units can be moved apart or
together using the joystick.
Position (2) is the operating position, position to set the sheet thickness and
also the delivery state.
In order to work with the joystick, when the device doors are open press and
hold the Set Up Machine button (see 5.1.1).
Abb. 15:
Display gear selection lever
Gear selection lever position 1
→
Indicator lights (1) and (3) light up
Gear selection lever position 2
→
Indicator lights (1), (2) and (3) light up
The B-units can be moved with the joystick, depending on the position of the
gear selection lever.
The brush unit indicator lights only show that the B-units can be moved.
The correct position of the brush belts must be determined using the
wear display (see Chapter 6.1).
Summary of Contents for SBM-M 1000 B2
Page 2: ...About this manual 2 Steel Brush Machine SBM M 1000 1500 B2...
Page 54: ......
