Linksys RV082 User Manual Download Page 50 | Manualshive

Page: 50 / 105

background image

41

Chapter 5: Setting Up and Configuring the Router
VPN Tab - Summary

10/100 8-Port VPN Router

Tunnel Test: Click the

Connect

button to verify the tunnel status. The test result will be updated in Status. If

the tunnel is connected, a

Disconnect

button will be available so you can disconnect the VPN connection.

Configure: This includes options for editing the tunnel, by clicking

Edit

, or deleting the tunnel, by clicking the

Trash Can

.

Tunnel(s) Enable

and

Tunnel(s) Defined

: This will show the amount of tunnels enabled and tunnels defined.

GroupVPN Status:

This section displays the status of VPN tunnels created with the Linksys VPN Client Software. These tunnels will
then be displayed here, with the following information about each tunnel:

Group Name: This will show the name you entered when creating the Client to Gateway tunnel.

Connected Tunnels: This will show the number of users logged in to the Group VPN.

Phase2 Encrypt/Auth/Group: This will show the Encryption (DES/3DES), Authentication (MD5/SHA1) and
Group (1/2/5) selected from the IPSec Setup sections of the

Gateway to Gateway

and

Client to Gateway

screens.

Local Group: This will show the IP address and Subnet Mask of the Local Group set up.

Remote Client: This column will show the remote client authentication type that is used for this specific
GroupVPN.

Remote Clients Status: Clicking

Detail List

will display the Group Name, IP address and Connection Time of

this Group VPN.

Tunnel Test: Click the

Connect

button to verify the tunnel status. The test result will be updated in Status. If

the tunnel is connected, a

Disconnect

button will be available so you can disconnect the VPN connection.

Configure: This includes options for editing the tunnel, by clicking

Edit

, or deleting the tunnel, by clicking the

Trash Can

.

VPN Clients Status:

This section identifies each user logged onto your network through the Linksys VPN Client software, and will
display the status of their connection, along with how long and when they connected and disconnected. If you’d
like to disconnect any user, select the box in the Disconnect column and then click the

Disconnect

button.

Figure 5-44: VPN Tab - Mode Choose

«
...
48
49
50
51
52
...
»

Summary of Contents for RV082










































































































Reviews:

No comments

Related manuals for RV082

Brand: Maipu Pages: 80

SRA311-008P8 Series

Brand: Divio Pages: 4

Brand: Solwise Pages: 7

Brand: Ubiquiti Pages: 23

DEEP LEARNING PLUS

Brand: Concept Pro Pages: 28

Brand: Chase Research Pages: 114

Brand: UNICORECOMM Pages: 19

Brand: Alfa Network Pages: 11

Brand: ZyXEL Communications Pages: 2

Brand: Netopia Pages: 138

Brand: N-Tron Pages: 2

Brand: QRS Pages: 11

CU8210-D001-0200

Brand: Beckhoff Pages: 25

Vigor 3200 Series

Brand: Draytek Pages: 356

Brand: NAUTICAST Pages: 20

Brand: MikroTik Pages: 5

Bipac 74 Series

Brand: Billion Pages: 8

Smart One WAC52G

Brand: Waver Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands