Linksys RV082 User Manual Download Page 49 | Manualshive

Page: 49 / 105

background image

40

Chapter 5: Setting Up and Configuring the Router
VPN Tab - Summary

10/100 8-Port VPN Router

VPN Tab - Summary

Summary

The VPN Summary displays summary information about the VPN (Virtual Private Network), along with the Tunnel
Status, GroupVPN Status, and VPN Clients Status.

Summary

: It shows the number of Tunnel(s) Used and Tunnel(s) Available. The 10/100 8-Port VPN Router

supports 50 tunnels.

Detail

: Click the

Detail

button to see detail of the VPN Summary.

Tunnel Status:

Add New Tunnel

: Click the

Add New Tunnel

button to add a Gateway to Gateway or Client to Gateway tunnel.

Select the type of tunnel you’d like to add from the

Mode Choose

screen (shown in Figure 5-44). A Gateway to

Gateway tunnel is created between two VPN routers. A Client to Gateway tunnel is created between the 10/100
8-Port VPN Router and a PC using the Linksys VPN Client Software. Click the

Add Now

button, which will open

the appropriate screen for setting up that type of tunnel.

From this section, you can jump to different pages of tunnels and also select how many tunnels you would like
listed per page. These tunnels will then be displayed here, with the following information about each tunnel:

Tunnel No.: As the tunnels are listed here, they are put in order, 1~50.

Tunnel Name: This is the Tunnel Name or Group ID Name that you entered when creating the tunnel.

Status: This will show the status of the tunnel, whether it is Connected, Hostname Resolution Failed,
Resolving Hostname or Waiting for Connection. If you select Manual on the IPSec Setup page, this will show
Manual or no Tunnel Test function for Manual Keying Mode.

Phase2 Encrypt/Auth/Group: This will show the Encryption type (DES/3DES), Authentication type (MD5/SHA1)
and Group (1/2/5) selected from the IPSec Setup sections of the

Gateway to Gateway

and

Client to Gateway

screens. If you chose Manual mode, this field will show the Encryption and Authentication method set up in
Manual mode.

Local Group: This will show the IP address and subnet mask of the Local Group.

Remote Group: This will show the IP address and subnet mask of the Remote Group.

Remote Gateway: This will show the IP address of the Remote Gateway.

Figure 5-42: VPN Tab - Summary

Figure 5-43: VPN Tab - Summary Detail

«
...
47
48
49
50
51
...
»

Summary of Contents for RV082










































































































Reviews:

No comments

Related manuals for RV082

Brand: Datasheen Pages: 25

RouterBOARD Groove

Brand: MikroTik Pages: 4

Anybus Communicator ABC4021

Brand: HMS Networks Pages: 60

Brand: Zonet Pages: 53

Brand: Rosewill Pages: 3

Brand: TP-Link Pages: 2

Brand: Aethra Pages: 2

Brand: Freund Pages: 6

Brand: Ozenda Pages: 116

Brand: Aewin Technologies Pages: 86

LonWorks Communication Module LN-01

Brand: Delta Electronics Pages: 1

NetVanta Analog Modem Dial Backup Interface Module

Brand: ADTRAN Pages: 2

AceroDURO 100/S100

Brand: CNC-Step Pages: 86

Brand: Enterasys Pages: 62

Brand: ExtraHop Pages: 3

Brand: Foxconn Pages: 1

Brand: Zhone Pages: 494

Brand: Comtrend Corporation Pages: 69

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands