Linksys RV082 User Manual Download Page 20

Page: 20 / 105

Chapter 4: Connecting the Router
Connection Instructions

10/100 8-Port VPN Router

Connection Instructions

1. Before you begin, make sure that all of your hardware is powered off, including the Router, PCs, hubs,

switches, and cable or DSL modem.

2. Connect one end of an Ethernet network cable to one of the numbered ports on the front of the Router.

Connect the other end to an Ethernet port on a network device, e.g., a PC, print server, hub, or switch.

Repeat this step to connect more PCs or other network devices to the Router.

3. Connect your cable or DSL modem’s Ethernet cable to the Router’s Internet port. If using the DMZ/Internet

port, connect a second cable to it, and the other end to the network device, e.g., modem or public server.

4. Power on the cable or DSL modem and the other network device if using one.

5. Connect the included power adapter to the Router’s Power port on the back of the Router, as shown in Figure

4-4, and then plug the power adapter into an electrical outlet.

The System LED on the front panel will light up as soon as the power adapter is connected properly.

If you need to configure your PCs, proceed to “Appendix G: Windows Help.” Otherwise, proceed to

“Chapter 5: Setting Up and Configuring the Router.”

Figure 4-2: Connect a PC

Figure 4-3: Connect the Internet and DMZ/Internet

Figure 4-4: Connect the Power

Hardware:

the physical aspect of computers,

telecommunications, and other information technology devices

Summary of Contents for RV082










































































































Search results

Summary of Contents for RV082

Reviews:

Related manuals for RV082

Brands by name

Popular brands

Linksys RV082, User Manual

Search results

Summary of Contents for RV082

Reviews:

Related manuals for RV082

Brands by name

Popular brands