Linhai 2004 ATV 260, Service Manual

Page: 225 / 362

CHAPTER 3C ENGINE 100/125/150/200
SERVICE MANUAL09.0
CHAPTER 3C ENGINE PAGE.3C - 33 -
High Tension Voltage Intermittent
●
Faulty main switch
●
Poor CDI terminal connection
●
Poor CDI ground
●
Faulty pickup coil
●
Poor high tension lead terminal connection
●
Faulty CDI unit
High Tension Voltage Normal but No Spark
●
Faulty spark plug
●
Faulty spark plug cap
No High Tension Voltage
●
Faulty main switch
●
Faulty Ignition coil
●
Faulty CDI unit
No or Intermittent High Tension Voltage
●
Faulty Ignition coil
3.7.3 CDI INSPECTION
Disconnect the CDI module from the wire
harness
Test resistance of the terminals with an
multi-meter.
●
Since there is semiconductor in return circuit,
testing result may be significantly different if
different multi-meter are used.
●
If the pointer on the dial flickers and finally
stops at
∞
in testing, it should be regarded as
normal. Because the capacitor in the CDI
module is charged while being tested and it
cannot discharge at this time.
(CDI for MINI ATV100/150)
：
(CDI for B-type 150/200):