D9U001SW0-0101_02
43/46
17 Maintenance
WARNING!
Risk of injury when working on the bed!
Check that the bed is disconnected from the electricity before carrying out assembly, disassembly and mainte-
nance.
Check that the bed’s wheel-brakes have been applied before carrying out assembly, disassembly and mainte-
nance.
Ensure that all features are locked on the Control Panel during installation, maintenance and cleaning.
WARNING!
A defective system could cause injury!
A defective system must be repaired by a qualifi ed service organisation without delay.
If it is not possible to repair the fault, do not use the system.
CAUTION!
Incorrect maintenance could result in damage to the system or the bed!
Make sure that only the manufacturer's customer service is performing maintenance.
17.1 System Maintenance
►
Servicing of any sort may be carried out only by qualifi ed and certifi ed persons or service organisations certifi ed
by LINET
®
. For information on servicing or service documentation and electrical wiring schematics, please contact the
manufacturer.
►
Ensure that programmed maintenance is carried out a minimum of once every 12 months.
►
Given the battery life, have Tag replaced every 5 years.
►
Given the battery life, have the integration module replaced every 10 years.
►
The manufacturer certifi es service organisations qualifi ed to carry out servicing and maintenance on LINET
®
beds
and systems.
►
Do not use a faulty or defective system. Contact the manufacturer or a service organisation certifi ed by the manu-
facturer immediately.
17.2 Spare Parts
The product serial labels contain information for claims and ordering spare parts.
