8
out of the bed.
If an incontinent resident occupies the bed, incontinence protection must be used for the mat-
tress.
Avoid risk of entrapment during patient´s presence on the bed.
The details of the nameplate must be observed.
Make sure that the space underneath the bed is absolutely free of persons, feet, animals or
other objects at any time, during any handling of the resident and operation of the bed.
As for the height adjustment, two power units are uses independent of one an-
other, it is important to move the patient surface at least once per day to the end po-
sition (highest – lowest position) depending on the adjustment cycle. This causes
potential height differences in the patient surface to be equalled out.
The bed may not be operated if it displays malfunctions that could cause a hazard to persons,
employees or third parties.
The bed may only be operated by persons who can guarantee correct handling because of their
training or knowledge and practical experience.
Before operating the bed, the person doing this must be satisfied with the functional safety and
the proper condition of the bed.
The bed must be subject to a function test, possibly daily or with each change of shift, so that
it is guaranteed that the bed can be used as intended without danger for the patient or the
operator.
The bed may only be moved on level and firm floor covering.
If the bed is occupied the castors must always be in braked position – otherwise there is a risk of
the patient falling when getting in or out, since he may support himself on the bed.
The height of the patient surface must be adjusted to the size of the patient to avoid the risk
of a fall.
When operating the mechanical emergency lowering of the backrest, (optional) this must al-
ways be fixed to the mattress restricting bar or lifting pole to avoid a sudden lowering.
When moving the bed to different positions, it must be ensured that no children, body parts or
other objects are in the adjustment area.