LINET 1WIS0309060007 User Manual And Technical Description Download Page 38 | Manualshive

Page: 38 / 65

LINET 1WIS0309060007 User Manual And Technical Description Download Page 38

38

8.2 Extension for the SafeFree

®

side guard

In order to increase the height by approx. 6 cm (2,4 inch), an extension is available as accessory

for the SafeFree

®

side guard.

Warning!

An unsuitable extension, which is not intended for the SafeFree

®

side guard, can be-

come loose and cause a fall of the resident. Make sure that the extension is suitable

for the SafeFree

®

side guard. Ensure the secure attachment of the extension on the

SafeFree

®

side guard.

If you want to attach an extension to the SafeFree

®

side guard:

•

Completely lift the SafeFree

®

side guard.

•

Place the extension centrally on the handrail of the side guard.

•

Press down the mounting clamps on the handrail until they engage and fix the extension.

If you want to detach an extension to the SafeFree

®

side guard:

•

Position the SafeFree

®

side guard of one side at a different height.

•

Press the release button of the SafeFree

®

side guard and push out the extension sideways over

the hand rail.

«
...
36
37
38
39
40
...
»

Summary of Contents for 1WIS0309060007


































































Reviews:

No comments