-94-
ڦ
Zoom in/out of the display
Touch the magnification value to zoom in/out the display.
ڦ
Time measurement between two points
On the screen, the blue dotted line is cursor C and the red dotted line is marker M.
First, move the cursor to the first signal position with [ ▲
], [
▲
], and touch [ENTER] or “Mark” to move the
marker to that position. Then, by [
▲
] and [
▲
] move the cursor to the signal position to where you want to
measure the time from the marker position.
The time between the cursor and the marker is displayed at “C-M:” on the first line of the screen.
ڦ
Search of signal status
When you touch “Search” at the bottom of the screen, the status display (1, 0, ↓, ↑) at the cursor position on
the left of the screen becomes x, and the area turns to be the input area of the signal status for the search
target. Input here the state you want to search, and use [
▲
] and [
▲
] to search in that direction and move
the cursor to the matching one. Touch “Search” again to end the waveform search mode and [ ▲
] and [
▲
]
returns to cursor C movement.
ڦ
Change the display order of signal lines
Select the signal whose display order you want to change by [ ▲ ] and [ ▼ ]. Then you can use [SHIFT] + [
▲ ] and [SHIFT] + [ ▼ ] to change the display order of the selected signals.
