-67-
Program input
Before starting the Program simulation, set the protocol and communication conditions in the “
Configuration”.
2.5 Communication Condition
Press [MENU] and touch "Function
"” ->
“Operation mode: Simulation” -> “
Function
: PROGRAM”.
〇
Input Method
◆
Command Field
Touch or press [0]~[C] to select a desired sub-command
(SEND, WAIT, IF commands etc.) or [TOP/DEL] to de-
lete commands. After deleting a command, the follow-
ing commands comes up instead and NOP command is
added at the end.
◆
Sub-Command Field
After the command field is entered, the cursor moves to
the sub-command entry field. Desired sub-commands
will be displayed in the right side of the screen. Touch or
press [0]~[7] to select a desired sub-command. To edit
the sub-command, move the cursor to the sub-command
field by [
▲
] [
▲
] and edit.
Touch “Advanced settings ” in the bottom of screen. Select one program from Program A~D and touch “Edit”.
At the beginning, NOP commands (invalid command) are inputted in all 512 lines.
The cursor is on the first line, 000. To move the cursor, swipe the screen or press [▼],[▲].To input the com
-
mand, touch desired command on the right part of the screen or press [0]~[F].
Press[SHIFT]+
[▼]or
[SHIFT]+
[▲]to go to another page (move 6 lines).
Press [SHIFT]+[TOP/DEL] to go to the first page, or [SHIFT] +[END/X] to go to the last page.
