-100-
Chapter 7 Save and Load of the Data
7.1 Storage device
An SD/SDHC card or USB flash drive can be used as a storage device, and measurement data and setting data can be
saved to it.
Optional SD/SDHC cards (SD-8GX, SD-16GX, SD-32GX, sold by LINEEYE) are available. You can use a USB flash
drive, but we do not guarantee the operation of all USB flash drives.
The measurement data automatically saved in the storage device us-
ing the trigger function or auto save function is saved in the storage
device specified in advance by “Save device” at “Auto save” tab of
"Record control" in [MENU].
The screenshot file of the screen display saved by the [SHIFT] + [ESC]
operation is saved in the storage device specified by "Screen shot
store" at the Display tab of "System Settings" in [MENU].
7.2 File Management Function
You can save, read, and delete the measured data and setting data in the storage device as a file that can be read/writ
-
ten by a PC. Set the storage device to this analyzer and display the top menu by [MENU] and touch “File operation”
at the bottom of the screen, or touch “File operation” from the operation menu [
] at the lower left of the data dis-
play screen to display the directory screen.
When both SD/SDHC card and USB flash drive are set, touch “Change device” from the operation menu [
] at the
lower left of the directory screen to switch to the directory screen of the storage device to be managed.
