-13-
2.2 Top Menu
Press [MENU] to set the initial settings. Swipe the screen to set all settings.
Touch the setting item, or press [ENTER] after selecting the item by [ ▲ ], [ ▼ ].
“File operation”, “System settings” and “Current time” on the bottom of screen are also needed to be set.
2.7 System Menu
Chapter 7 Save and Load of the Data
2.3 Measurement Port
Press [MENU] then touch “Interface
”.
Select the measurement port of target device.
Also it is able to select the item by [ ▲ ], [ ▼
]and change the setting by [
▲
],[
▲
].
Setting items are different for optional expansion boards.
ڦ
Measurement Port
Select “RS-232C” to measure RS-232C, or “RS-422/485” to measure RS-422/485. Select TTL and its voltage
to measure TTL interface.
Selected interface will be displayed on the upper right of screen.
