LineEye LE-170SA Instruction Manual Download Page 58

Page: 58 / 60

-56-

10.4 Warranty and After Service

Warranty

Trouble

■

Contact the distributor or LINEEYE.

Warranty Card

■

The warranty card is attached to the product.

Confirm the content and fill out the blanks and keep it.

User registration

For the after support and the information for the product please register your

product from LINEEYE website.

Repair

Although the configuration and setting is checked and are correct

■

but the product does not work well, contact us with the detailed

information.

Repair within the warranty period

■

We will repair it following our warranty policy. First please inform us the

situation and then send it back to us with the warranty card.

Repair after the warranty period

■

We will repair the product when the repair is possible. Check the price
guide in our website and then send it back to us with the repair request
document.

Warranty period: 1 year from the purchase

(Does not include the one for the software.)

http://www.lineeye.com/

Model

LE-170SA

Serial number

8 digits number od Serial No.

Purchase date

Day / month / year

Situation

More detailed information is appreciated.

Summary of Contents for LE-170SA





























































Search results

Summary of Contents for LE-170SA

Reviews:

Related manuals for LE-170SA

Brands by name

Popular brands

LineEye LE-170SA, Instruction Manual

Search results

Summary of Contents for LE-170SA

Reviews:

Related manuals for LE-170SA

Brands by name

Popular brands