-40-
7.3 Trigger setting
You can set the 4 pairs of the trigger factor and the action for it.
Press [Menu] and touch [Trigger] to
display the trigger setting display.
Check the box of the trigger to be
valid. The valid / invalid condition of
the trigger can be controlled by the
trigger action while measurement.
Touch the setting display of the factor and action of trigger 0 to 3 to set at
each setting display.
When you use timer / counter on the trigger function, touch [Timer / Counter
setting] to set it in advance.
→ 7.4 Timer / Counter function
Trigger factor setting
Touch the factor of each trigger to select the trigger factor to be specified.
Error
■
Check the one to be selected from
LIN synchronous error (the value
of the sync-field is other than
55h), parity error, checksum error,
or framing error (the stop bit is
dominant).
CAN data
■
Set the target for a CAN data
frame. ID and the data up to 8 byte
can be set. X(Don’t Care) and bit
mask (W0,W1,W2) can be set too.
