-36-
Touch the table number where you
want to register the data.
ID
■
Set the ID in HEX.
Transmit response
■
By checking here it transmits the contents set in “Data” as a response.
Data
■
Touch [0] to [9] and [A] to [F] to input the transmission data in HEX.
Check sum
■
Set the checksum in HEX. By touching [Calc.] it sets the automatically
calculated value.
Data sweep
■
By checking here it can sweep the data of transmission.
← 6.3 sweep setting
6.3 Sweep setting
Touch [Sweep setting] to display the parameter to sweep.
Sweep size
■
Select the data size to sweep from
8 or 16 bit. For 16 bit select the
endian from big-endian or little-
endian.
e.g. When setting 0123h.
Little-endian Big-endian
Position
■
Set the position to insert a data to sweep from 0 to 7.
01
23
01 23
