-20-
3.2 Functions
Touch [Menu] → [Function].
Select a function according to the target device and interface.
Function
■
Monitor
: Monitor send / receive data between CAN or
LIN devices.
→ Chapter 5 Monitor Function
CAN Simulation
: Simulate CAN test data.
→ Chapter 6 Simulation Function
LIN Simulation
: Simulate LIN test data.
→ Chapter 6 Simulation Function
Terminal Control of CAN
■
Mark on the box of “CAN port termination” to have the terminal control
for CAN port.
LIN Simulation Mode
■
Select the master or slave mode.
Repeat count
■
Set the number of times to simulate the LIN test frames.
Set “O” to send the test frames repeatedly.
Repeat interval
■
Set the interval (1 to 99999 ms) of sending test frames for LIN simulation.
