Page 28 of 33
19/02/2015
Weed Brush Turbo
Bowden cable of the fuel control lever
Place the fuel control lever on “Choke”.
Place the fuel control lever on “Stop” and in this process
observe the counter lever on the carburettor (see the
operating manual provided by the motor manufacturer in
the sub-package of the weed brush).
You must be able to move the fuel control lever with light
resistance. The counter lever on the carburettor must follow the
executed movement.
Have the repair performed by your specialist workshop if
the Bowden cable does not function as described above.
5.2.4 Cleaning the weed brush
ATTENTION!
Cleaning the weed brush with a high-pressure cleaner can
damage the seals, bearings, and joints of the weed brush.
Therefore:
•
Do not clean the weed brush with a high-pressure cleaner
Clean the weed brush as needed with a gentle water spray and
auto care agents.
5.2.5 Check and clean the air filter
If you use the weed brush in a dusty environment, have your
specialist dealer show you how to check the air filter.
Maintenance and repair
