Page 22 of 33
19/02/2015
Weed Brush Turbo
WARNING!
Danger of poisoning and danger of material damage when parking
the hot weed brush in enclosed spaces.
When parking the hot weed brush in enclosed spaces there is
danger of explosion due to petrol fumes.
Therefore:
•
After operation let the machine cool down.
•
Only park it in a closed room after it has cooled down.
WARNING!
Danger of injury and danger of material damage if the weed brush
is operated by unauthorised persons.
Therefore:
•
After operation store the weed brush in a locked area.
4.1 Preparatory activities
4.1.1 Adjusting the steering arm
The steering arm on this machine cannot be adjusted in height.
Ensure that it is firmly mounted as specified in section 3.2,
page 18.
4.1.2 Checking the status of the wire bristles
The wire bristles should be at least 5 cm in length. If the wire
bristles are worn below this length, they must be replaced.
4.1.3 Checking the motor oil level
Prior to each start of the motor, check the oil level (see the
operating manual provided by the motor manufacturer in the
sub-package for the weed brush).
4.1.4 Filling fuel
Prior to the start of the motor, fill at least half full with fuel (see
the operating manual provided by the motor manufacturer in the
sub-package for the weed brush).
Operation
