SCS1620 Product Manual
Lightwave Communications
Page
16
www.lightwavecom.com
The DEVICE ports can be configured for baud rates of 2400 - 115.2K baud, and
as DTE or DCE. The data word must be 8/none/1 and employ Xon / Xoff flow
control.
3.5
Connecting the Network Port
The SCS1620’s network port (10/100 BaseT) allows remote access to the
attached devices and the system administrative functions.
The network parameters for the network port must first be set up before the
SCS1620 may be reached remotely.
See Section 4 for a Quick Start for setting up your Network Port. Also refer to the
setup
setup
setup
setup
command in Section 5.3 for additional network configuration.
3.6
Connecting the Modem Port
An optional modem module is available for the SCS1620. The modem may be
installed at the factory or can be ordered separately for later installation.
SCS1620 modem module
The SCS1620 modem is an analog modem supporting connection rates up to
38,400 baud. The modem has a single
RJ11
-type analog telephone jack plus five
status LEDs. The user interface to the modem is identical to that found on the
terminal port or the network port. The Modem is configured as
Device Port 19
.
The default communication parameters for the MODEM port are:
•
38400 baud,
•
8 data bits,
•
1 stop bit,
•
No parity, and
•
RTS/CTS flow control.
