Lightwave Communications SCS1620, Product Manual

Page: 23 / 98

A Lantronix Company SCS1620 Product Manual
15.00.032 Rev. B Page 23
5.3 The setup setup setup setup User Interface
Note: The following example screens were captured using PuTTY (visit
http://www.chiark.greenend.org.uk/~sgtatham/putty/ for more information) on a
Windows 2000 PC. Many other terminal emulation packages can also be used.
Programs such as Hyperterminal are included with the Windows operating
system, and commercial packages may also be used, if desired.
Auto-Run of setup setup setup setup on Initial Startup
The scripted programming session (
setup setup setup setup
) automatically runs when the System
Administrator logs into the SCS1620 for the first time. It is a text-based user
interface, and requires
VT100 terminal support using the keyboard (no mouse).
At default values, SSH is not enabled (encryption keys have not been generated)
so telnet is often used to initially access and configure the SCS1620.
The Text User Interface is also accessible at any time thereafter by running the
command
setup
setup setup
setup
from the sysadmin command line.
The initial automatic invocation of the setup script helps the user set up the
majority of the system functions when it is first installed. It also SAVES the
programming changes to non-volatile memory to ensure that the desired
changes are maintained. Upon completion of this automated script file, the
SCS1620 will automatically reboot to ensure that all processes will be updated.