A Lantronix Company
SCS1620 Product Manual
15.00.032 Rev. B
Page 15
The default communication parameters for the TERMINAL port are:
•
9600 baud,
•
8 data bits,
•
1 stop bit,
•
No parity,
•
Xon/Xoff flow control, and
•
port type of DCE
.
Adapters from Lightwave Communications may be used to connect the
TERMINAL port to the serial port on your console or other DTE device.
See Appendix A for adapter and port pinouts.
1.
Attach the Lightwave adapter to your console (use
PN 200.0066
Adapter
in most cases) or your PC's serial port (use
PN 200.0070
Adapter).
2.
Connect the Cat 5 cable to the adapter. Connect the other end to the
SCS1620 TERMINAL port.
3.
Turn on the terminal or start your computer’s communication program.
3.4
Connecting to the Device Port
Any serial device that has a console port may be connected to the SCS1620 for
consolidated remote administration. Device Ports are individually configurable
(DEVICE_1 through DEVICE_16). The console port must support the RS-232-C
interface. Additionally, many servers must either have the serial port enabled as
a console, or must have the keyboard and mouse detached. Consult the server
hardware and/or software documentation for more information.
Connections on Rear of SCS1620, Device Ports in center
The default communication parameters for the Device ports are:
•
9600 baud,
•
8 data bits,
•
1 stop bit,
•
No parity,
•
Xon/Xoff flow control, and
•
port type of DCE
.
Modem
Module
Serial Device
ports
Terminal
port
Power Manager
(PCU8) port
10/100 Network
port
