Lightware UMX4x4-Pro, User Manual

Page: 37 / 129

UMX4x4-Pro
User’s Manual
Section 4 . Operation Page 37 / 129
Info If the second item of the priority list was selected (e.g. SPDIF) and the first item (e.g.
HDMI embedded) appears on the input UMX4x4-Pro selects the first one ( HDMI
embedded) immediately.
3) The HDCP capability on the input port can be enabled or
disabled with the HDCP enabled setting. It can be set to
Yes or No. This can prevent unnecessary HDCP
encryption with certain source devices. Note that only
unprotected contents can be played on the source if this setting is No. Use the up
▲
and down
▼ buttons to change the value. For more information about HDCP handling
see section 2.6 and 2.6.3 on page 14 .
4) Navigate to the
‘Analog video….’ Submenu then press the
ENTER

button to change the analog video settings on
the selected input port. Use the left
◄ and right ► buttons
to select the parameter to be changed. Use the up
▲ and
down
▼ buttons to change the value.
a. Phase
b. H.Pos
c. V.Pos
d. H.Size
e. V.Size
f. Clock
g. Return
Navigate to the ‘Return’ item then press the ENTER 
button to step back to the
‘Analog video’ menu.
Info
The ’Analog video’ submenu available only if there is a
valid analog audio signal on the current input port.
Info UMX4x4-Pro examines the analog video signal on the input port and adjusts the
analog video settings automatically. The user can modify these values.
5)
Navigate to the ‘Analog audio….’ Submenu then press the
ENTER

button to change the analog audio settings on
the selected input port. Use the left
◄ and right ► buttons
to select the parameter to be changed. Use the up
▲ and
down
▼ buttons to change the value.
Gain
Analog audio gain is the amplify of the built in preamplifier. It can be set up manually
from 0 dB to 24 dB with 3 dB steps.
Phase
If there is a phase reverse item in the amplifier chain analog audio signal can be
compensated by changing the polarity in the UMX4x4-Pro. It can be set up manually
to 0 degree (Normal) or 180 degree (Inverted) manually.
DC filter
Remove DC component from the analog audio signal if it is enabled. It can be set up
manually to Enabled or Disabled.
Input #
HDCP enabled:Yes
Input #
Analog video....
Input #
Analog Audio....
Input #
Gain:0 dB Input #
Phase: 0 Input #
DC filter:Enable
Input #
Return
Input #
H.Pos:455
Input #
V.Pos:41
Input #
Phase:0
Input #
H.Size:1600
Input #
Clock:2160
Input #
Return
Input #
V.Size:1200