Lightware UMX4x4-Pro, User Manual, Page: 21 / 129

UMX4x4-Pro
User’s Manual
Section 3 . Controls and connections Page 21 / 129
3.3.4. Ethernet port
Lightware UMX4x4-Pro matrices can be remote controlled through Ethernet as well. The
Ethernet port can be connected to a LAN hub, switch or router with a UTP patch cable. If
connecting to a computer directly, a cross UTP cable has to be used!
See section 4.5 about remote operation on page 41 for more information.
LED1 LED2
OFF
no activity no link
Amber
half duplex 10 Mbps
Green full duplex 100 Mbps
Blink
activity N/A
Figure 3-5. RJ45 receptacle connector
Figure 3-6. RJ45 plug
Lightware recommends the termination of TP cables on the basis of TIA/EIA T 568 A or
TIA/EIA T 568 B standards.
Pin Name
TIA/EIA
T568 A
color and
name
TIA/EIA
T568 B
color
and name
1 TX + white/green stripe white/orange stripe
2 TX - green solid orange solid
3 RX + white/orange stripe white/green stripe
4 Not used blue solid blue solid
5 Not used white/blue stripe white/blue stripe
6 RX - orange solid green solid
7 Not used white/brown stripe white/brown stripe
8 Not used brown solid brown solid
Table 3-3. Recommended termination of TP cables
8 1
LED1
LED2
1
8
1