Page 18 / 129
Section
3
.
Controls
and connections
3.2.
UMX4x4-Pro rear view
Figure 3-2. UMX4x4-Pro rear view
Inputs
UMX4x4-Pro has 4 input ports. Each port has one video, one
analog stereo audio and one digital audio input.
DVI-I in
Standard 29-pole DVI-I connectors for input connections. It
accepts analog and digital signals.
Analog audio in
Double RCA jack connector for analog stereo audio input signal
with right and left channel.
S/PDIF in
RCA jack connector with S/PDIF digital audio signal.
Outputs
UMX4x4-Pro has 4 output ports. Each port has one video, one
analog stereo audio and one digital audio output.
DVI-D out
Standard 29-pole DVI connectors for outputs - only digital pins
are connected.
Analog audio out
Double RCA jack connector for analog stereo audio output signal
with right and left channel.
S/PDIF out
RCA jack connector with S/PDIF digital audio signal. Embedded
audio is still present on the DVI-D outputs.
Reset button
Hardware reset button. It resets the whole router, however saved
settings, presets and EDIDs will be preserved.
Ethernet port
Standard RJ45 connector. This port can be connected to Local
Area Network.
RS-232 port
9-pole D-sub female connector for standard RS-232 port.
Power
Standard IEC power connector. The router works with 100 to 240
Volts, 50 or 60 Hz power sources.
Fuse
Replace with F 3.15A type only.
Inputs
1
Outputs
5
RS-232 Port
11
Ethernet port
10
DVI-I in
2
Power
12
Fuse
13
S/PDIF in
4
Analog audio in
3
Reset button
9
DVI-D out
6
S/PDIF out
8
Analog audio out
7
2
1
3
5
6
7
8
9
10
11
12
13
4
