Page 36 / 129
Section
4
.
Operation
Press the ENTER
button to execute IP reset. Confirmation
message will be appeared. The string to be shown is longer
than LCD display line. Wait a second and the string will be
shifted to left character by character.
Press the ENTER
button again to confirm the operation or press the up
▲ or down ▼
buttons to cancel the operation.
HDCP key reset submenu
This operation clears the HDCP key cache in the matrix. This
is useful when a source cannot accept as many keys as the
matrix stores.
Press the ENTER
button to execute IP reset. Confirmation
message will be appeared. The string to be shown is longer
than LCD display line. Wait a second and the string will be
shifted to left character by character. Press the ENTER
button again to confirm the operation or press the up
▲ or down ▼ buttons to cancel the
operation.
Input settings
Navigate to this menu in the main menu list.
Select the input port
Use the up
▲ and down ▼ buttons to select the port that needs
adjustment and then press the ENTER
button.
Input port settings submenu
Use the left
◄ and right ► buttons to select the parameter to be changed. Use the up ▲
and down
▼ buttons to change the value.
1)
The ‘Interface’ parameter sets the video signal type which
is connected to the input port. It can be set to Auto, Digital,
Analog YUV, Analog RGB or Analog auto. Use the up
▲
and down
▼ buttons to change the value.
The Auto source setting accepts both digital and analog signals on the input and
selects the one which is first detected.
Info
If the source signal type is unknown the recomended interface setting is the Auto.
2) Three different audio sources can be connected to one
input port at the same time.
The ‘Audio’ parameter selects
which incoming audio signal will be placed to the selected
output port. Use the left
◄ and right ► buttons to select
the parameter to be changed. Use the up
▲ and down ▼ buttons to change the value.
The audio source settings can be:
Mute, HDMI, Analog, SPDIF
Auto (HDMI, Analog), Auto (SPDIF, Analog)
Auto (HDMI, SPDIF, Analog), Auto (SPDIF, HDMI, Analog)
If only one input is selected (
Analog
or
SPDIF
or
HDMI
); than only this type of audio
can be placed on the output.
If
Mute
is selected than the matrix ignores the audio input signals.
Every
AUTO
value has a priority order. The matrix checks the first item of the priority
list. If there is a valid audio signal on that audio input the signal will be placed to the
outputs
. If there isn’t the matrix checks the second item of the priority list. And so on.
HDCP key reset
EDID reset?
Press ENTER to p
HDCP key reset?
Press ENTER to p
Input settings
Input #
Input #
Interface:Auto
Input #
Audio:Analog
