2. Product Overview
Hybrid Modular Matrix Switcher series – User's Manual
15
Applied firmware package: v1.0.0 | LDC software: v2.4.0b3
2.2.
Matrix Frame - Rear View
MX2M-FR24R
1
Auxiliary board
slots
Board slots for the
. These slots support low-speed
boards only.
2
Input board
slots
Board slots for the AV
. These slots support high-speed input
boards and low-speed boards either.
3
Output board
slots
Board slots for the AV
. These slots support high-speed
output boards and low-speed boards either.
9
8
7
6
5
1
2
3
4
4
Power supply
units
Hot swap slots for
. The matrix has redundant PSUs
which can be switched on and off without interrupting the video transmission.
Using one or both of the PSUs at the same time is also possible.
The double PSU allows to connect them for two different AC power lines to
ensure the continuous power for the matrix.
5
Uplink /
Secure control
connector
Neutrik etherCON Ethernet connector with 1 Gbps Ethernet connection to control
the device, firmware upgrade purpose and for user Ethernet access.
6
Uplink
connector
Neutrik etherCON Ethernet connector with 1 Gbps Ethernet connections for user
Ethernet access.
7
Secure control
connector
Neutrik etherCON Ethernet connector with 1 Gbps Ethernet connection to control
the device and firmware upgrade purpose.
8
RS-232
connector
9-pole D-SUB connector for serial communication to control the device.
9
Service button
Hidden button for special operations.
Layout of the Input/Output Board Slots and Power Drawer Slots
The following figure shows the
layout of the auxiliary (AUX), input
(IB), output (OB) board slots and
the order of the PSUs on the rear
side of the matrix.
See more details about the
installation of the I/O boards in the
Board Installation and Handling
section.
See more details about the
installation of the power supply
units in the
section.
