2. Product Overview
Hybrid Modular Matrix Switcher series – User's Manual
17
Applied firmware package: v1.0.0 | LDC software: v2.4.0b3
2.4.2. MX2M-4OPTJ-IB
Ports
▪
4x multimode SC simplex input connectors supporting HDMI 2.0 standard
Features
▪
Single Fiber Technology, multimode transmission via SC connector
▪
Uncompressed video up to 18 Gbps datarate (600 MHz pixel clock)
▪
4096x2160@60Hz/4:4:4 maximum resolution (600MHz)
▪
Compatible with HDMI20-OPTJ-TX90 fiber optical extender
▪
Audio de-embedding to the Audio layer
▪
Hot-swappable design
Status LEDs
PWR/Live
off
The board is not powered.
lit at 50% brightness
The board is under booting procedure.
blinking fast between 0%
and 100% brightness
The board is fitted in an inappropriate slot (input in an output, output in
an input slot). Hence, it is not passing video.
blinking between 50%
and 100% brightness
The board is operational (the embedded software is running on the
controller).
Active
off
The control sequence has not been completed.
on
The control sequence has been completed and the board is being
controlled by the matrix switcher.
blinking (slow)
The device firmware is under firmware upgrade procedure (bootload mode).
blinking (fast)
The board is fitted in an inappropriate slot (input in an output, output in
an input slot). Hence, it is not passing video.
Status LEDs of the SC Connectors
OPTJ 1 / OPTJ 2 / OPTJ 3 / OPTJ 4
off
The optical RX module is not powered.
blinking (red)
No fiber is connected and the laser is disabled.
on (yellow)
Fiber detected but link initialization failed.
blinking (green)
Link is receiving video without HDCP encryption.
on (green)
Link is receiving video with HDCP 1.x encryption.
on (blue)
Link is receiving video with HDCP 2.x encryption.
on (pink)
The optical RX module is in bootloader (firmware upgrade) mode.
blinking (pink)
