manualshive.com logo in svg

Lightware MX2M-FR24R, User Manual

Share
Download
Lightware MX2M-FR24R User Manual Download Page 58

 

7. Software Control - Lightware Device Controller 

Hybrid Modular Matrix Switcher series – User's Manual 

58

Applied firmware package: v1.0.0 | LDC software: v2.4.0b3

7.9.2. 

Network

Settings menu - Network tab

Static IP address and DHCP (dynamic IP address) settings can be set on this tab. Always press the 

Apply 

settings

 button to save changes.

Factory defaults settings of the matrix can be recalled with a dedicated button. See the factory default 

values in the 

Factory Default Settings 

section. 

#network #dhcp #ipaddress

7.9.3. 

System Log

Settings menu - System Log tab

All matrix related notifications are listed in the System log tab which are grouped in four categories: info, 

notice, warning, and error. The categories are summarized on the right side of the tab in the 

Summary

 section. 

The list can be customized by the 

Column Switchers

 by turning on or off the following columns: Time, Level, 

Identification, and Message.

All system log tracks can be saved to the control computer with the 

Export full system log

 button. 

#log

INFO: 

Please always download the system logs and send to the Lightware Support Team 

(

[email protected]

) for the most effective collaboration in the case of a troubleshooting issue.

 

Summary of Contents for MX2M-FR24R































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands