4. Installation
Hybrid Modular Matrix Switcher series – User's Manual
32
Applied firmware package: v1.0.0 | LDC software: v2.4.0b3
Step 3.
Place the new PSU to the power supply slot and push it using the handle till the device connects to
the motherboard of the frame.
ATTENTION!
Make sure that the fixing plate is its place correctly.
4.4.
Electrical Connections
The following sections describe all possible electrical connections of the MX2M series frames, PSUs and
I/O boards.
4.4.1.
AC Power Connection
MX2M-PSU-500-F power supply unit contains standard IEC power connector and
works with 100 to 240 Volts AC, 50 Hz or 60 Hz power sources.
Frame type
PSU location
Number of PSUs
Output per PSU
(max)
MX2M-FR24R
hot-swappable
2
500 W
See the details about the powering on procedure in the
4.4.2.
USB Mini-B Connector
MX2M series matrix frame provides standard USB 2.0 mini B-type connector for software control
and firmware upgrade purpose.
4.4.3.
Ethernet Connectors
Neutrik etherCON Connectors
MX2M series matrix frame provides Neutrik etherCON RJ45 connectors for secure
control purpose, LAN and user Ethernet access.
Wiring of LAN Cables
Lightware recommends the termination of LAN cables on the basis of TIA/EIA T 568 A or TIA/EIA T 568 B
standards.
Wiring of LAN cables by types
WARNING!
Never connect non-assembled CATx cable to the port while the unit is powered, it may
damage the device.
Top
Bottom
Side
Pin
TIA/EIA T568 A
Color and name
TIA/EIA T568 B
Color and name
1
white/green stripe
white/orange stripe
2
green solid
orange solid
3
white/orange stripe
white/green stripe
4
blue solid
blue solid
5
white/blue stripe
white/blue stripe
6
orange solid
green solid
7
white/brown stripe
white/brown stripe
8
brown solid
brown solid
