manualshive.com logo in svg

Lightware MX2M-FR24R, User Manual

Share
Download
Lightware MX2M-FR24R User Manual Download Page 18

 

2. Product Overview 

Hybrid Modular Matrix Switcher series – User's Manual 

18

Applied firmware package: v1.0.0 | LDC software: v2.4.0b3

2.4.3. 

MX2M-DH-4DP12-IB

Ports

 

▪

4x DisplayPort input connectors supporting DisplayPort 1.2 standard

Features

 

▪

DisplayPort 1.2 compliant

 

▪

DisplayPort input signals are converted to HDMI signals via the built-in chipset on each port

 

▪

Supported input format of 4K@60Hz with 4:4:4 sampling pattern and 10 bit per component

 

▪

Supports conversion from 4K/UHD at 60Hz 4:4:4 10bit to 4K/UHD at 60 Hz YCbCr 4:2:2 10 bit

 

▪

Audio de-embedding to the Audio layer

 

▪

Hot-swappable design

Status LEDs

PWR/Live

off

The board is not powered.

lit at 50% brightness

The board is under booting procedure.

blinking fast between 0% 

and 100% brightness

The board is fitted in an inappropriate slot (input in an output, output in 

an input slot). Hence, it is not passing video.

blinking between 50% 

and 100% brightness

The board is operational (the embedded software is running on the 

controller).

Active

off

The control sequence has not been completed.

on

The control sequence has been completed and the board is being 

controlled by the matrix switcher.

blinking (slow)

The device firmware is under firmware upgrade procedure (bootload mode).

blinking (fast)

The board is fitted in an inappropriate slot (input in an output, output in 

an input slot). Hence, it is not passing video.

2.5. 

Output (OB) Boards

2.5.1. 

MX2M-4HDMI20-OB

Ports

 

▪

4x HDMI output connectors supporting HDMI 2.0 standard

Features

 

▪

4K@60Hz 4:4:4, 18 Gbps bandwidth

 

▪

HDMI 2.0 compliant

 

▪

HDCP 1.x and 2.3 support

 

▪

Audio de-embedding to the Audio layer

 

▪

HDMI output ports have flange mounting option

 

▪

Hot-swappable design

Status LEDs

PWR/Live

off

The board is not powered.

lit at 50% brightness

The board is under booting procedure.

blinking fast between 0% 

and 100% brightness

The board is fitted in an inappropriate slot (input in an output, output in 

an input slot). Hence, it is not passing video.

blinking between 50% 

and 100% brightness

The board is operational (the embedded software is running on the 

controller).

Active

off

The control sequence has not been completed.

on

The control sequence has been completed and the board is being 

controlled by the matrix switcher.

blinking (slow)

The device firmware is under firmware upgrade procedure (bootload mode).

blinking (fast)

The board is fitted in an inappropriate slot (input in an output, output in 

an input slot). Hence, it is not passing video.

 

Summary of Contents for MX2M-FR24R































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands