LightPointe AireLink 60, Installation And User Manual, Page: 97 / 133

AireLink

60 Installation and User Manual Rev. D CLI -- Command Line Interface
Page 97
7.2.1 Command Show Flash
Command:
airelink60(config)#show flash
Description: Show hardware and software versions of system flash partitions
Example:
Flash Partition: Golden
FW version: 1.8.1.2213.3936 2015-09-17
SW version: 1.8.1.1710.2135 2015-09-17
Flash Partition: Update
FW version: 2.0.aes.2214.3939 2015-10-20
SW version: 2.0.aes.1710.2472 2015-11-17
7.2.2 Command Show Interface
Command:
airelink60(config)#show interface
Description: Show status of networking interfaces
Example:
airelink60(config)#show interface
data interface
flow control: enabled
type of connection: SerDes (Fiber) media
Data interface eth0:
power: up
link status: up
SFP module part number: FTLF8524P2BNL-MD
SFP module part number (hex): 46 54 4c 46 38 35 32 34 50 32 42 4e 4c 2d 4d 44 0
module status: connected
SFP module transceiver ID: 0:0:0:0:20:40:c:15
SFP module temperature: 60 C
SFP module TX power: -5 dBm
SFP module RX power: -5 dBm
management interface
Speed: 100Mb/s
Duplex: Full
Auto-negotiation: on
Link detected: yes
MAC address: 00:0A:35:00:00:02
IP address: 192.168.1.11
Mask: 255.255.255.0
Gateway: 192.168.1.1