LightPointe AireLink 60, Installation And User Manual

Page: 21 / 133

AireLink

60 Installation and User Manual Rev. D Introduction
Page 21
Figure 1-4: Shipping Boxes 2 and 3 (2 foot antennas)
1.2 MAIN RADIO COMPONENTS
The AireLink™ 60 comes either with an integrated 120 mm lens antenna or with external one or foot
high gain parabolic Cassegrain antennas.
1.2.1 AireLink™ 60 ODU with integrated antennas
The AireLink™ 60 with integrated lens antenna shown in Fig. 1-5 is designed around an aluminum-
based IP 66 rated outdoor housing to protect the electronics from rain, dust and other environmental
conditions. The system can be used to easily create a shorter distance point to point wireless Network
connection between remote locations. This highly integrated and outdoor rated system can be easily
installed at walls, towers or other structure by using the pole mount alignment bracket that comes
with the system. The stainless steel mounting bracket is designed to accommodate pole diameters
ranging from 2.5….4.5 inches (65…115 mm). All network/management and power connectors located
on the system user panel can be easily accessed via a clear and detachable access panel cover. Power
and port status LEDs on the back panel are visible from the outside through the transparent cover.
IP67 rated cable gland compression fittings for power/networking cables are integrated into the access
panel cover.
The transmission equipment operates in full-duplex mode and in slightly different frequency bands.
The lower band radio transmits in the 59 GHz frequency band and the upper band radio transmits in
the 62 GHz frequency band. On the back panel is a
HIGH BAND and LOW BAND sticker to distinguish
between the radios. The AireLink™ 60 radios are equipped with a Bluetooth Low Energy (BLE)
transceiver that allows for remotely monitoring the radio via smart phone of tablet via an encrypted