Lighthouse REMOTE 3012PN, Operating Manual

Page: 43 / 58

00
248083310-1 Rev 3 5-1
5
Technical Data
Introduction
This chapter describes the operation and programming of the
instrument.
Control
Design
Figure 5-1 States for the REMOTE-2 PN Series Particle Counter
START
• Starts microprocessor, and initializes hardware.
SETUP
• The REMOTE-2 PN Series ships in Program Mode:
During the first 20 seconds, the unit waits for programming
commands. If any programming commands are received within the
first 20 seconds, those commands will be examined and executed.
If the commands are valid, the parameters will be set. If no
Start
Setup
Count Timer
Alarm
Output
Counts