Lighthouse ApexP3, Operating Manual

Page: 60 / 130

Lighthouse ApexPortable Operating Manual
5-30 248083440-1 Rev 5
WARNING:
Be sure to
record and store the unit’s
passwords in a safe place.
If the password is lost or
forgotten, contact
Lighthouse technical
support at 1-800-945-5905
(USA Toll Free) or 1-541-
770-5905 (Outside of
USA) for assistance. The
unit may have to be
returned to the factory to
reset the password.
To restrict who can operate the instrument, enable the POWER ON
password. When POWER ON password is enabled, the correct
password will be required each time the instrument is turned on.
To restrict who can configure the instrument, enable the CONFIG
password. When the CONFIG password is enabled, the correct
password will be required before the user can access the CONFIG
screen.
• To set the password for the POWER ON, press the POWER ON
button, then type in a password using the numeric keypad. Press the
ERASE button to delete the last character, if needed.
• Press ENTER to save.
• To set the Configuration password, press the CONFIG button, then
type in a password using the numeric keypad.
• Press the ERASE button to delete the last character, if needed.
• Press ENTER to save the changes.
• Press the buttons to enable either or both passwords.
Press BACK to return to the CONFIG screen or press MAIN to return
to the MAIN screen.
Service
This section of the Configuration screen is reserved for Lighthouse
Authorized Service Providers only. The correct service password must
be entered to access this area.
STATUS
Pressing the STATUS button displays the versions of each of the
Instrument’s firmware modules. Lighthouse Technical Support
personnel usually ask for this information during a support call. See
Figure 5-46.
Figure 5-46
Apex Portable
STATUS Screen
STATUS