![background image](http://html1.mh-extra.com/html/light-my-bricks/10266/10266_instructions-manual_1911510007.webp)
Take the Jet section and slightly disconnect the part above by pulling it up, then push the
technic pin out slightly by approx. 5mm.
2.)
Take the
Blue 30cm Bit Light
and loop the cable as shown below: Place the loop of the
cable around the technic bar’s head, then pull the other end of the cable so that the cable
Summary of Contents for 10266
