![background image](http://html1.mh-extra.com/html/light-my-bricks/10266/10266_instructions-manual_1911510043.webp)
Lay the cable underneath this section in between studs before reconnecting the lower left
section over the top.
20.)
With the front of this section still facing toward you, flip this section upsidedown (so the
yellow control handles are facing you). Lay both cables in between studs in each corner before
reconnecting the middle lower section.
Summary of Contents for 10266
