1of3
Please go to
for product cleaning tips. Go to the
selection.
marking pen, 1/16”
drill bit, center punch, hammer, drill and wrench.
(1) A21 Medium Base bulb 150W Maximum, bulb not included.
Missing Parts? Contact your original place of
purchase.
www.quoizel.com
Care + Maintenance
Light Source:
Tools Required:
Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses,
Estimated Assembly Time:
Preparation:
20-30 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture.
For Style WWD9009IB
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Package Contents
A
Mounting Screw
x 3
Fixture
Body
x 1
E
Nipple
x 1
G
STEP 1
Remove Styrofoam inside of the Cage
-
A. Remove the cage from the Fixture Body (G) by loosening lock
screws on the bottom.
B. Remove Styrofoam inside of the cage.
2018 QuoizelInc.
ReleasedDate:2018-05-04
visit us on-line at www.quoizel.com
Styrofoam
(Remove)
Cage
Fixture Body
Lock Screw
Figure 1
Installation Guide #IS-WWD9009IB
B
Fixture Loop
x 1
C
Rubber Washer
x 1
D
Flat Washer
x 1
F
Hex Nut
x 1
STEP 2
Install the Fixture Loop
-
A. Screw the Nipple (E) onto the
Fixture Loop (B) and hand tighten
until snug.
B. Pass the Nipple (E) through the
Rubber Washer (C), the hood of
the Fixture Body (G) and the Flat
Washer (D) in turn. Secure them
together by threading the Hex Nut
(F) onto the Nipple (E). Hand
tighten until snug.
B
C
D
F
E
G
STEP 3
Install the Bulb and Cage
-
A.
the
the
B. Place the cage back onto the
Fixture Body (G) and secure with
previously removed lock screws.
Hand tighten until snug.
Insert
bulb onto
socket and
screw snugly into place.
Bulb (not
included)
Figure 3
Lock Screw
Cage
Fixture Body
Figure 2
