Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2012 Philips Group • L0112
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytecaster
®
Recessed Downlighting
2000AIC
Page 1 of 1
3 3/4” Aperture Incandescent Insulated Ceiling AirSeal
®
Frame-In Kit
Reflector Trim
Frame-in Kit
7 1/2”
5 1/2”
9 5/8”
Features
1. Housing:
.032” aluminum. UL Listed for direct contact with thermal
insulation. AirSeal
®
Housing minimizes air leakage to less than 2 CFM at
1.57 PSF, which complies with Model Energy Code (Section 602.3.3) and the
Washington State Energy Code (Section 502.4) and reduces heat loss and
condensation on ceiling. Access door for inspection of junction box.
2. Mounting Frame:
.036” (#20 ga.) galvanized steel. Accommodates all
ceilings up to 1” thick. Push-in/twist-out rotoclips hold reflector flush to
ceiling.
3. Junction Box:
4” X 3 1/2” X 2”; .063” (#14 ga.) galvanized steel. UL listed
for maximum of 4 No. 12 ga. 90° C through branch circuit conductors. Access
door inside of housing allows easy inspection of wiring without removal of
housing. Integral cable clamps permit attachment of nonmetallic Romex
®
or
armored cable without need of additional connectors.
4. Mounting Bars:
.059” (#16 ga.) galvanized steel. 13” long bars extend
to 27” with integral nailing tabs. Attaches to wood joist without need of
accessories.
5. Socket Housing:
.036” (#20 ga.) galvanized steel.
6. Socket:
Porcelain medium base; nickel plated screw shell. Pre-wired with
#18 ga. SF1 leads to junction box.
7. Thermal Protector:
Meets NEC and UL requirements. Located inside
housing
Options and Accessories
Mounting Bars:
1964
- 20” set of (2)
T-Bar Ceiling Clips:
1956
- set of (4)
Plaster Ceiling Ring:
1959
- 7/8”depth for wet plaster ceilings
277V Remote Step
7997
- 277V down to 120V
Down Transformer:
300W max. load.
Extra Thick Ceiling
1967C
Mounting Ring:
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit
Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight
Aperture Cone
Baffles
Satin Cone
2000AIC 2012
2005 2008 2027 2022 2090 2084WH
2012NM
2005BNM
2008NM
2027BNM
2022WH
2084CD
2013
2005WH
2010
2027NM
2013NM
2005NM
2010NM
2027WH
2013BK
2029WH
2013BKNM
2029BK
2013CD
2029BKNM
2013CDNM
2029CD
2013WH
2029CDNM
2013WD
2029CLNM
2013WDP
2029GD
2029GDNM
2029CL
Recessed
Enclosed
Open Wet
Adjustable
Eyeball
Diffuser
Location
Labels
UL (Suitable for Damp Locations) I.B.E.W.
Complies with Air Leakage Requirements as stated in the Model Energy Code
and the Washington State Energy Code.
AirSeal
®
is a registered trademark of Lightolier.
Romex
®
is a registered trademark of General Cable Industries Inc.
